Research on the Piston with Damping Hole and Pressure Recess of Axial Piston Motor
Abstract
Based on the principle of hydrostatic bearing, in this study, several novel kinds of pistons were designed out, and the mathematic model of hydrostatic bearing on piston was established and analyzed. It was also found that, the diameter of damping hole and the width of pressure recess had impact on the radial load capacity of piston, the overall efficiency of axial piston motor, and the friction and wear capacity of piston. Results from tests shown that in the case of the pressure difference of 10MPa to 22MPa and the different speed of 500rpm to 2000rpm, the overall efficiency of axial piston motor could be improved by 0.1%-0.6%, compared to the ordinary piston. On the other hand, the wear scar of the piston modified was circular, and the one of the ordinary piston was longitudinal and deep, which shown that the piston modified could improve the wear capacity.
Keywords:
axial piston motor, hydrostatic bearing, damping hole, efficiency, frictionPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.
