Thermo-hydrodynamic Airflow Behavior Analysis in Solar Chimney Device
Abstract
A numerical methodology has been developed to analyze the thermo-hydrodynamic aspect of airflow occurring in solar chimney power plants (SCPP) according to some dominant parameters. The general curvilinear coordinates finite volume method (GCCFVM), which is necessary in the case of turbulent flow through complex geometries, is used in this work. The governing equations describing the steady state turbulent fluid flow are solved numerically using this technique. It is shown that the chimney tower dimensions control directly the hydrodynamic field. However, the collector dimensions control directly the thermal field and indirectly the hydrodynamic field. It is demonstrated that the solar radiation influences strongly and positively the thermo-hydrodynamic field by increasing the mass flow rate. The mass flow decreases with the increase of the ambient temperature and then the system is more efficient with low ambient temperature. Indeed, the mass flow rate increases from 0.8 kg/s up to approximately 2 kg/s when the solar radiation varies between 200 W/m2 and 1000 W/m2 for fixed ambient temperature value of 30 °C. When ambient temperature increases from 10 °C up to 50 °C, the mass flow rate decreases slightly and in a linear manner from 1.7 kg/s to 1.5 kg/s for fixed solar radiation intensity value of 600 W/m2. Contrasting to other studies, conclusion based on simplified analytical models, ambient temperature affects adversely the performance of a SCPP in decreasing the mass flow rate. This conclusion should be taken into consideration when analyzing models dedicated to the prediction of solar chimney power plant performance.
Keywords:
solar chimney power plant, meteorological parameters, thermo- hydrodynamic analysis, turbulent flow, numerical simulationPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.
