In-situ TEM Investigation of Solid Phase Transformations and Reactions
Abstract
In this paper, an example of phase analysis during annealing is presented using in-situ TEM. The example is demonstrated on amorphous Cu-Mn/C thin films focusing on phase identification in a multicomponent system. The transient states following the crystallization of the amorphous Cu-Mn alloy and the reaction with the C substrate were analyzed by evaluating the diffraction patterns recorded at different temperatures. The camera constant was calibrated using the internal standard method. The change in composition of the Cu(Mn) solid solution was calculated by separating the effect of thermal expansion and solute concentration. Identification of the forming phases was aided by analyzing and comparing the probability of formation of all phases in the Cu-Mn-C-O system. After the crystallization of amorphous Cu-Mn alloy into Cu(Mn) and α-Mn-based solid solutions, the formation of the following carbide phases was observed: Mn23C6, Mn5C2 and Mn7C3.
Keywords:
electron diffraction, in-situ TEM, phase analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.
