Utilizing UV-Sensitive Camera for UV-Reflectance-Imaging-Based Active Pharmaceutical Ingredient Content Prediction

Authors

  • Frida Barbara Molnar
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • Bence Szabó-Szőcs
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • Lajos Madarász
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • Zsombor Kristóf Nagy
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • Dorián László Galata
    Affiliation
    School of Engineering, University of Leicester, University Rd, LE1 7RH Leicester, United Kingdom
  • Attila Farkas
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • Lilla Alexandra Mészáros
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
  • György Marosi
    Affiliation
    Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
https://doi.org/10.3311/PPch.45361

Abstract

This study presents a proof-of-concept monochrome camera system featuring a UV-sensitive sensor, enabling direct UV detection for non-destructive quantification of active pharmaceutical ingredient content in two-component canrenone-microcrystalline cellulose tablets. Differences in UV absorption between API and excipient resulted in distinct grayscale intensity distributions on the tablet surface, enabling active pharmaceutical ingredient (API) quantification. Tablets were prepared with API contents ranging from 0 to 6 w/w% and imaged in-line on a conveyor belt under 365 nm UV illumination. Acquired images were pre-processed through background elimination, and illumination correction, then grayscale intensity histograms were extracted. These histograms served as inputs for partial least squares regression, producing a linear correlation between predicted and nominal API content, with a root mean square error of calibration 0.20 w/w%, root mean square error of cross-validation 0.24 w/w%, root mean square error of prediction 0.27 w/w%. The obtained relative prediction error was 6.78% at a target of 4 w/w%. The approach demonstrates rapid, non-destructive assessment of API content without sample preparation. By combining a cost-effective direct UV-imaging method with multivariate analysis, the system shows potential for real-time monitoring of API content in continuous tablet manufacturing.

Keywords:

UV reflectance imaging, API content prediction, machine vision, partial least squares, solid dosage forms, process analytical technology

Citation data from Crossref and Scopus

Published Online

2026-11-16

How to Cite

Molnar, F. B., Szabó-Szőcs, B., Madarász, L., Nagy, Z. K., Galata, D. L., Farkas, A., Mészáros, L. A., Marosi, G. “Utilizing UV-Sensitive Camera for UV-Reflectance-Imaging-Based Active Pharmaceutical Ingredient Content Prediction”, Periodica Polytechnica Chemical Engineering, 2026. https://doi.org/10.3311/PPch.45361

Issue

Section

Articles