STRESS CONCENTRATION AND FATIGUE LIFE PREDICTION FOR DISKS CENTRIFUGAL SEPARATORS
Abstract
The paper presents the continuation of a previous study ( Anghel, Iatan, Pasat, 1998) concerning the elastic analysis of disk centrifugal separators. The goals are the state of stress analysis and stress concentration determination in the main critical junctions of the separator´s bowl, subjected to loads corresponding to the main technological conditions. Taking into account the cyclic nature of technological loads (centrifugal forces r omega 2) standard procedures for estimating the fatigue and residual strength of the entire bowl are discussed for prediction of the lifetime. The numerical results presented were obtained for a real small separators bowl. Two numerical analyses were developed to identify the critical junctions of the bowl due to the main loads: central axial load (Fa), centrifugal force (r . omega2) and internal pressure (p). One analysis is based on the extension of the classical thin shell theory and the flexibility matrix method ( Anghel, Iatan, Pasat, 1998) and the second on the finite element method (FEM), using a professional package, COSMOS/M Designer II. The study reveals a reasonable accuracy of the analytical and numerical results, an accurate positioning of the critical junctions and a great number of lifetime service cycles. On the other hand, the study may be a suitable method for preliminary design analysis and load-carrying capacity prediction of such structures.
Keywords:
disk centrifugal separators, state of stress, critical, junction, numerical analysis, flexibility matrix method, finite, element method, fatigue life prediction, load-carrying capacityHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



