EXTRACTION OF H<I><sub>3</sub></I>PO<I><sub>4</sub></I> from Wet Phosphoric Acid By nC4 - nC7 Alcohols
Abstract
Most phosphate rocks are used to manufacture phosphoric acid by digestion with concentrated sulfuric acid by the wet method. Many impurities dissolve also in the acid and then go to the fertilizer which makes this acid unsuitable for food or pharmaceutical uses. Pure phosphoric acid for food purposes is obtained by reduction of the phosphate rocks in an electric furnace to obtain P2O5 by the dry method. This method consumes a lot of energy and so it is rather expensive. There has been an increased interest in the past few years in purifying commercial wet phosphoric acid to obtain a pure acid. Several methods were developed on the pilot plant or commercial scales but most of the works are still in the developmental stage. This paper studies extraction of H3PO4 by nC4 - nC7 alcohols by liquid-liquid extraction. The alcohol mainly used is n-heptanol. The effect of temperature and mixing time on distribution ratio is studied. The results show that nC7 alcohol is a suitable solvent for H3PO4 extraction. The temperature has a slight negative influence on extraction. The extraction is enhanced by increasing P2O5 and alcohol concentrations. The extraction decreases by increasing the number of carbon atoms or the molecular weight of the n-alcohol, but phase separation is slower. Extraction of uranium and heavy metals is negligible while extraction of fluorine and iron is relatively small.
Keywords:
alcohols, extraction, phosphoric acid, purificationHow to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



