FORMATION AND CHARACTERIZATION OF NITROGEN IMPLANTED SILICON-ON-INSULATOR STRUCTURE
Abstract
Silicon wafer has been implanted with 200keV14N+ ions to a dose of 0.75 x 10 18N+ /cm2 at a temperature of 600°C and has been annealed at 1300°C for 2 hours. During post-annealing rapid redistribution of the implanted nitrogen results in formation of buried polycrystalline nitride layer under the damage-free (except for few dislocations < 10⁵/cm2) single crystal silicon layer, which is characterized by n type conduction. The buried dielectric has a resistivity of approximately 10⁸ Ωcm. P channel integrated circuit transistors have been fabricated in the buried nitrid area. The measurements of these transistor devices demonstrate the suitability of nitrogen implanted SOl structure for integrated circuit application.
How to Cite
ÁDÁM, A., KHAHN, N. Q., FRIED, M., SCHILLER, V. “FORMATION AND CHARACTERIZATION OF NITROGEN IMPLANTED SILICON-ON-INSULATOR STRUCTURE”, Periodica Polytechnica Chemical Engineering, 34(1-3), pp. 63–71, 1990.
Issue
Section
Articles
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



