FLAME RETARDED, REINFORCED POLYPROPYLENE TECHNICAL FIBRES
Abstract
A new simple method has been elaborated for increasing the strength of oriented polypropylene fibres by additives. The principle of the process is the incorporation of inorganic fillers (such as talc or CaCO3 ) into polypropylene matrix material in a manner that allows maintaining the stretch ability of the fibre formed in this way. A new halogen free additive system has been developed which contains reactive P, N, Si and Zn derivatives that react with each other in the production line forming a flame retarded polypropylene fibre by reactive extrusion. The influence of the additive system under combustion is based on the formation of a closed intumescent surface layer, that hinders the heat and flammable material transport.
Keywords:
reinforced polypropylene, filler, surfactants. flame retardants, fibersHow to Cite
Marosi, G., Bertalan, G., Anna, P., Tohl, A., Maatoug, M. A., Ravadits, I., Csontos, I. “FLAME RETARDED, REINFORCED POLYPROPYLENE TECHNICAL FIBRES”, Periodica Polytechnica Chemical Engineering, 42(2), pp. 125–130, 1998.
Issue
Section
Articles
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



