Extraction and separation of hexavalent molybdenum from acidic sulfate solutions using Alamine 336 as an extractant
Abstract
Extraction and separation of hexavalent molybdenum from acidic sulfate solutions using Alamine 336 as an extractant and kerosene as diluent is described. Variation of acid concentration influences the percentage of extraction of hexavalent molybdenum indicating the ion exchange type mechanism. Effect of concentration of Alamine 336 on the extraction of hexavalent molybdenum in the presence of divalent copper and trivalent iron is also presented. The upper limit of concentration of extractant for extraction of hexavalent molybdenum free from divalent copper and trivalent iron is observed with 0.1 mol/L of Alamine 336. However, when the concentration of Alamine 336 is increased to 1.0 mol/L, about 48% of copper is extracted along with molybdenum but without any iron. The method is suitable for the separation of molybdenum from copper and iron contained leach liquor. The optimized experimental parameters such as phase contact time, effect of extractant, metal, loading capacity of extractant and followed by strip ping studies with ammonia, hydrogen peroxide, sodium hydroxide, sodium thiosulfate and thiourea is presented. From the above experimental data we proposed the aqueous mechanism for hexavalent molybdenum extraction processes.
Keywords:
Hexavalent molybdenum, extraction, separation, Alamine 336How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



