Investigation and Comparison of 5 % Diphenyl – 95 % Dimethyl Polysiloxane Capillary Columns
Abstract
In gas chromatography, for the analysis, the most important thing is the well-chosen column. After having decided about which stationary phase is the best for our measurement and we know the length, the inner diameter and film thickness, we can buy the column from a lot of manufacturers. The products of these manufacturers’ look similar to each other, but they are different, because of the different manufacturing technologies. These differences could have significant influence on the separation. It is so important to compare the „same” columns, despite the manufacturers’ efforts to produce the best quality columns.
5 % diphenyl – 95 % dimethyl polysiloxane stationary phase is widely used. Its slight polarity makes it able to determine very different compounds from the alkanes, through volatiles, drugs, fatty acid methyl esters, amines or phenols.
In our work, we tested 5 % diphenyl – 95 % dimethyl polysiloxane stationary phase columns with an 8-component mixture. These columns were from different manufacturers. During isothermal conditions, we determined the height equivalent of theoretical plates on 8 linear velocity level. We represented these parameters as the function of linear velocity. With a constant linear velocity, we measured the excess sorption enthalpy and entropy. From the chromatograms we spotted differences in the retention and in resolution, which is important if we use the column for volatiles or for complex samples. With these parameters we can show many differences between the columns. These parameters have significant influence when we want to use our column for a given task.
Keywords:
gas-chromatography, column testing, diphenyl-dimethyl polysiloxane, efficiency, excess enthalpy and entropyPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



