Electrical Properties of Graphene / Natural Rubber Nanocomposites Coated Nylon 6.6 Fabric under Cyclic Loading
Abstract
In the present study, an elastomeric nanocomposite was prepared by two roller mixing mill with the Natural Rubber (NR) and Nano Graphene Platelets (NGP). The Nylon 6.6 cord fabrics were laminated with the prepared NR/NGP nanocomposite layers. The NR/NGP composites and Nylon 6.6 cord fabric laminated nanocomposite plates were cured at 165 °C for 10 min under pressure. Nylon 6.6 fabric reinforced NR/NGP nanocomposites were electrically characterized under free and cyclic loading conditions. NGP addition to NR improved the electrical conductivity. Under cyclic loading produced nanocomposite and cord fabric layered plates showed periodical sensing behavior with same amplitude in each period.
Keywords:
nanocomposite, Graphene, Natural Rubber, cyclic loadingPublished Online
2018-06-18
How to Cite
Kasım, H., Yazıcı, M. “Electrical Properties of Graphene / Natural Rubber Nanocomposites Coated Nylon 6.6 Fabric under Cyclic Loading”, Periodica Polytechnica Chemical Engineering, 63(1), pp. 160–169, 2019. https://doi.org/10.3311/PPch.12122
Issue
Section
Articles
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



